Gumideck

Tested in extreme weather conditions

The materials used for production characterize
in the highest durability for the weather conditions.

8°C

Humidity: 97%
Tested in extreme weather conditions

The materials used for production characterize
in the highest durability for the weather conditions.

-14°C

Humidity: 54%
Tested in extreme weather conditions

The materials used for production characterize
in the highest durability for the weather conditions.

31°C

Humidity: 66%

Production of the boards

1. Natural Ash - drying

Natural ash-wood is dried for several months. Humidity is decreased to a very low level. The timber comes only from certified forests, conducting reasonable and responsible forest policy what confirms the FSC Certificate.

2. ThermoASH - thermal modification

Process of wood modification in the temperature of 200°C. Change of the coloration in the whole section. The highest durability class for weather conditions. After the modification process, the boards are remoisturized in the athmosphere of saturated steam and get the moisture appropriate for outdoor applications

3. ThermoASH - planning and oiling

Planning and drilling of the holes. The boards receive shape and dimensions of the finished decking board. Final machine oiling by using of the dedicated oils with an addition of UV filters and colour pigments protects the boards against the intensive sun and rapid temperature changes.

Completely natural process of modification (only very high temperature)

Ecological, water-based oil

Boards being sold finished, oiled – ready to be mounted

FSC – wood comes from certified forests

The highest (FIRST) class of weather durability

Connector

The connector is made of high resistant, synthetic gum, used in car industry. Its specially designed shape allows for easy and multiple installation without loss of properties even after many years of use.

Special material, very durable in low and high temperatures,
doesn’t lose its properties even after many years of permanent use.

Synthetic gum with ideal parameters. HARD enough to provide solid connection
between the boards and ELASTIC
for as easy mounting as possible.

Sound-damping base prevents the effect of KNOCKING under the feet.

Durability and strength were confirmed in laboratory research and multiple stress tests.

The synthetic material used for connectors can be fully recycled.

Quality confirmed by 10 years warranty.

Maintenance

Natural wood gives a lot of joy during its use. It is warm, esthetic and environmental friendly. Its beauty, however, also needs some special care which will help to keep much longer its fresh look and will slow down natural processes of degradation.

Periodical maintenance can be done without help of any specialist - this is definitely not complicated and laborious process. The decking should be washed and later covered with a new layer of oil by using a brush or roller. After such a refreshment the decking gets back its original colour and is protected for an upcoming season.

Recommended liquids and oils as well as other care materials can be found in our online shop. In case of any questions just call us.

- with application dedicated for outdoor wooden decking

- ecological (water based)

- with an addition of colour pigment, protecting from loss of colour

Table of maintenance

Depending on the conditions in which the wood is being used and how large is the exposition for weather factors the periodic refreshments can be done with different frequency shown in the table below:

Type of roof:	Open decking / Decking partialy roofed	Roofed decking
Frequency	2 times a year	Once a year
Season	Before Winter and in Spring	In Spring

Periodic maintenance of the decking is very important because it definitely increases the durability of the wood. The oil layer gradually disappears, therefore it should be refreshed as it is the best protection against the humidity and UV rays causing the aging of the wood.

Recomended liquids and oils
can be found in online shop.
If you have any questions? Just call: +372 56354233